Normally the garage doors around us are manually operated. These garage doors have to be manually opened or closed. You will lock and unlock them with your hands. To avoid the ordeal of manually operating the garage door you should install the automatic opener for your garage door. Installation of the garage door is not at all a difficult task. All you need is to have an assistant for few tasks rest you can do yourself with a little bit of know how in just few hours.
First, you should place the track for the garage door to open or close. After you have placed the track, connect it to the drive unit. This drive unit consists of a motor that will do all the work related to the opening or closing of the door of the garage. After this connect all the parts of the track. Now connect the rising bracket to the end of the track afterwards attach it to the shaft over the opening of the garage door.
In the next step due to its weight, you will be required to attach the motor to the shaft present in the ceiling. Now connect the wires from the motor to the switchboard present on the wall. Now the installation of infrared sensors is also quite important so that the garage door will stop while closing if something comes in between the door. In the last step, you will make connection of the door with the door opener to be used by you for opening or closing the door.
This is the outline of the various steps related with the installation of the garage doors. To complete this process successfully you will need to have some know how of how this stuff works. However, if you are stuck somewhere then you should first read the installation manual and if the problem cannot be solved be prepared to call the professional to help you out in the installation process.
Murphy loves to share information on topics like General Construction New York
and New Kitchen Installed
. You may visit us for more information.