Ham Radio Antennas

RSS Author RSS     Views:N/A
Bookmark and Share          Republish
One of the serious parts of a ham radio arrangement is the antenna. You could have the costly and the powerful engineer on the market these days but your signal goes nowhere w/out a good setup antenna arrangement.

There are a lot of different kinds of antennas for the operator of ham radio. There are antennas like the quad and yagi and non directional antennas like the vertical. Each of these kinds of antennas have their own place. There are wired antennas of all sizes and types depending on the occurrence being utilized and how much space you have to put an antenna up.

The yagi antenna type is directional and has a few elements that are designed for 1 frequency. There are antennas that will tune to 2 or 3 frequency bands but drop some bandwidth and power in the design. These kinds of antennas are intended to be mounted on a pole or tower support type with a means of putting them in the place that you like the signals to go. They are so popular with the critical hams because of their capability to transmit and receive radio signals in the preferred direction.

The quad antenna, like the yagi antenna, is also a directional antenna. These directional antennas tend to be so large at some occurances. They are so effective directional antennas if you've the place to put them up. Quad antennas are created of wire and some other kind of supporting formation such as fiberglass or bamboo poles. They're mounted so they can be turned into the preferred direction as well.

Antennas that are wire, for the most part made with a particular frequency. They could be so simple in design like a dipole, which is 2 pieces of wire lined in the center and placed between 2 supports and comparatively flat or assisted by 1 pole and the sides inclined like an upturned "V" shape or assisted by 1 pole with the wire inclined in the position that you like the signal to go. These antennas are so simple to tune, design, and install and are so popular with starting operators of ham radio. Wire antennas could be so complex with a lot of pieces of wire, coils, signal traps, tuner and insulators components.

Such antennas are the commonly used Ham Radio Antennas types. Antenna tuning, design, and installation could use a lot of the operator's time, but it is so rewarding when these signals come in and out where you like them to, with the utmost power transfer.

Resource Box:

See more about this HamRadioAntenna and http://www.hamradioantenna.org/ provides information about HamRadioAntenna.

Report this article
This article is free for republishing
Source: http://www.a1articles.com/ham-radio-antennas-1222101.html

Bookmark and Share

Ask a Question about this Article