Fitting Pine Skirting Boards – Dealing with Internal and External Corners

Fitting skirting boards to internal and external corners in between your walls and floors is as crucial as that of other parts of the installation process. This usually goes first before the painting process. This is somehow one of the most complex parts of the process and it pays to have some knowledge on how you may do it. How will skirting boards fit exactly on the provision?

There are different types of skirting boards. Some are thick whilst some are thin. Whatever shape or form you choose, make sure you get the exact fit to make the construction project look better. Beyond that, you may want to try the work on your own and start fitting the baseboards yourselves.

Fitting skirting boards on internal corners

Skirting boards are like works of art. But remember that you should fit them perfectly not abstractly. If you are dealing with internal or inner corners, you must consider the following tips on fitting the baseboards.

1. Type of joint used. The profiled joint is used for internal corners. The other side of the joint is one with a cut square whilst the other end is profile shaped. This type of joint is used in order to make sure that the end of the second skirt board piece will lie alongside the front portion. The front profile will be established by cutting a 45-degree vertical portion on the skirting.

2. Type of saw utilised in the process. There are different types of saws that may be used as well. This will depend upon the skirting board style. With a straight profile found from the edge, the tenon saw is favourable. For other profiles, coping or jig saws are ideal. Holding the saw carefully is crucial to getting the right fit for the internal corners of the skirting boards.

Fitting skirting boards on external corners

The external corners are those found in between the two ends of the internal corners. These are mitre joints formed by skirting pieces. Fitting the external corners come next to fitting the internal corners. In some instances, there are gaps created whilst putting the skirting on the external corners.

There is a solution to this problem. A certain form of filler may be used in the gaps created between the skirting and that of the walls. Fitting external corners can be done in two ways though:

1. The mitre cut on only one end of the profile. The cut should be made first on the profile before positioning the skirt boards. The back of the mitred corner wall should be marked. This is important in cutting the mitre.

2. The mitre cut on both ends. In this process, one end should be mitred first. The length may then be established through placing the skirting boards just across the chimney breast. Markings will be made on the other end.

Once you have fitted the skirting boards for the internal and external corners, you are about ready to fix them. In this instance, you may choose to use traditional nail and hammer method. But, you may also opt for a specialised nail for masonry. Using these techniques will give your skirting boards a perfect fit.

Want to learn more things about fitting pine skirting boards? Get some tips through the help of http://www.skirtingboardsdirect.com