Liquid Waterproofer is a bitumen paint solution which is ideally suited for waterproofing and the weather protection of steelwork and concrete. It also provides a corrosion resistant coating helping to increase the life span of the materials it protects. Liquid Waterproofer bitumen paint is also resistant to low levels of acids and alkalis and can withstand prolonged oxidation. Typical application would be to stop the ingress of water on concrete structures below ground, when backfilling with spoil is involved.
Bitumen Paint can be applied to the following materials:
• Iron
• Steel
• Lead
• Zinc
• Aluminium
• Asbestos Cement
• Concrete
• Stone and Brick
This makes Liquid Waterproofer the ideal solution for ideal for many applications, where a waterproof skin can stop water penetration or give a corrosion resistant finish.
Easy to use Bitumen Paint Solution
Liquid waterproofer can be easily applied via a roller, brush or spray. A minimum of 2 coats on a dry surface is required to ensure adequate coverage and best protection results. You'll find that on metal and smooth surfaces a coverage of 10/m2 per litre can be achieved.
Health & Safety
Naturally when using Bitumen paint products care should be taken to avoid contact with your skin and eyes. We would recommend you consult the health & safety data sheet before use. Personal Protective Equipment (PPE) can be purchased from a range of DIY stores.
Buying Liquid Waterproofer
Liquid Waterproofer can be purchased from a range of retail outlets, and can also be purchased online.
Author RSS Views:
Print this article
Ask about this article