Safety Measures To Be Followed While Welding

A welder should start his work only after reading the manual properly. The manual contains important safety information. Make sure that anyone who operates the machine is familiar with its contents. If the manual becomes lost or damaged, contact the manufacturer for a replacement. There are manufacturers who provide manuals on-line. Your skin may be damaged if it is exposed to ultraviolet or infrared rays. Before starting your work, make sure that you button shirt collars, cuffs and front pockets so that you are protect your skin from catching sparks. Do not keep matches in your pockets. Before you start your welding work, wear proper safety gear like helmet, gloves and clothing. Always wear flame-resistant clothing, such as denim pants and a shirt made from tightly woven material or a welding jacket. Nowadays you can find different types of gloves for specific welding processes like stick gloves, medium duty MIG gloves and TIG gloves etc. Protect your foot by wearing High top leather shoes or boots. Smoke emitted during welding pose a health hazard.

Use an exhaust hood to remove fumes from the area and ensure enough clean breathing air is available. Welding helmets should be worn to protect the operator’s face and eyes when welding or watching. Make sure that you also wear approved safety glasses with side shields and ear protection under the helmet. Always buy Auto-Darkening helmets. See to it that these helmets meet ANSI standards. Industrial grade helmets react at speeds of 1/10,000 to 1/20,000 of second and have adjustable shades settings of #9 to #13 for welding. Avoid auto-darkening helmets that darken with a reaction time of 1/2,000 to 1/3,600 of a second. This is not adequate for industrial applications. Auto-darkening helmet reduces neck fatigue. It also saves several seconds between a weld, which quickly adds up to several minutes on larger components. The weld area contains only the tools and equipment that operator uses; nothing more, nothing less. Boom-mounted wire feeders add flexibility, efficiency and operator comfort to high-production welding stations. The boom rotates 360 degrees and moves 60 degrees up and down to create a 24- or 32-ft. diameter work area. Use fixturing whenever possible. The simple gearbox rotates a 2,200 lb component. Always incorporate safety into daily work habits and incentives compliance. If safety becomes an ingrained part of your corporate culture, you can expect reduced lost-time incidences and improved productivity.



Brayan Peter is an expert author for Welding Equipment. He written many articles like Plasma Cutter, TIG Welding Equipment, welding helmets Diesel Generators. For more information visit our site everlastgenerators.com. Contact him at weldings.info@gmail.com