Aerial Lift Safety Tips

It has been found that most of the advertising companies are now using aerial lifts for painting purposes. So, it can be easily said that the use of the aerial lifts have increased significantly and as a result its scope have increased drastically. Now, it is almost necessary that before using the aerial lift we should train the persons involved in that worksite so that the major health hazards can be prevented. So, to overcome the hazards here are some aerial lift safety tips:

1. Close platform lift: - It is always advisable that the platform of the lift should be closed and this point should given proper care as most of the accidents are causing mostly from platform. At the time of the training, all points regarding platform of the lift should be taught carefully. This is because once they get into the field and they commit mistake it is useless to teach them again.

2. Body position: - Another important point regarding the safety tips is that the person should stand in the middle of the bucket of the bucket truck and should not lean his/her body taking the support of the guardrail as this could be very dangerous.

3. Bumpers: - Never ride on the bumpers of the lift. The result may prove fatal.

4. Weight limit: - You should never cross the weight limit of the bucket. The accurate weight capacity is mentioned in the catalogue and the user should strictly adhere to it. It is because violation in the instructions given in the manual may cause harm to the machine and may result into a loss of life as well.

5. Site:- Always work on the site where population density is less, if any such condition comes like that you have to work in a populated area so mark the workplace with labels like cones ,red flags mentioning that "work is going on".

6. Modification: - It has been found that most of the users if face any problem they voluntarily change the alignment of the lift without prior permission of the manufacturer. This is also a reason for major cause of accidents. Before going for any change in the alignment the user should consult it with the manufacturer, so that the machine life can be increased. The permission should be in written.

7. Position: - One more thing should be kept in mind by the user that is ground position. Before using the lift the ground position should be examined carefully. Because if the ground is steep or slope the lift truck will also be positioned like this and a lift doesn't function properly in a steep or slope position.

8. Protection: - The lift sideways should be protected because if anything falls sideways, then the protection will help it to fall directly into the grounds without causing damage to other things.

9. Retrained: - If after some days the jobsite changes, the machine changes or the man cannot run the lift properly, the person should be retrained.

10. Manual: - Always keep the instruction manual at the worksite and not at the office which will help the onsite worker to overcome many problems and preventing any sort of damage.